InJet® 388 CRRD Combo
The InJet® 388 CRRD “Combo” is primarily designed for precision plate cleaning after soldering. The cleaning system can also be used for high-quality removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprint, or the aforementioned cleaning applications, along with cleaning the boards after soldering. It is also possible to use the machine to remove the cured conformal coating.►
InJet® 388 TWIN CRD Sausage dog
InJet® 388 TWIN CRD is primarily developed for removing solder pastes and SMT adhesives from stencils, PumpPrint, squeegee and misprint. The cleaning system can also be used for post-soldering plate cleaning or for a combination of plate cleaning and the above-mentioned cleaning processes. All processes are fully automated and take place in 2 process chambers, where the cleaning takes place in the first inlet chamber, after which the cleaned part is automatically transported by the medium transfer space to the 2 process chamber for rinsing and drying. This chamber is also an outlet chamber. Both chambers can be used in parallel, which increases machine capacity and reduces cross-contamination compared to single-chamber equipment.
Sonix® 355 CRRD
Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, parts of coating machines and coated PCBs for repair and subsequent coating. All processes are automated and run in 4 separate process chambers, which are also storage tanks. Can also be used for “dual” application - one chamber for coating frame and pallets, second for reflow oven and wave soldering machine parts. All 4 chambers can be used at the same time, which increases the cleaning capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.