InJet® 388 CRD is developed primarily for the removalof solder pastes and SMT adhesives from stencils, PumPrints,squeegees and misprints. The cleaning system can also be used for PCB cleaning, or for a combination of PCB cleaning and the afore-mentioned cleaning processes. The machine can also be used for the removal of cured conformal coating.Technical data sheet►
Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, parts of coating machines and coated PCBs for repair and subsequent coating. All processes are automated and run in 4 separate process chambers, which are also storage tanks. Can also be used for “dual” application - one chamber for coating frame and pallets, second for reflow oven and wave soldering machine parts. All 4 chambers can be used at the same time, which increases the cleaning capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.
InJet® 388 TWIN CRRD “Sausage Dog” is developed primarily for high-capacity and precise plate cleaning after soldering. The cleaning system can also be used for high-capacity removal of solder pastes and SMT adhesives from stencils, PumpPrint, squeegees and misprints. Cleaning takes place in the first inlet chamber, after which the cleaned part is automatically transported to the central passage chamber where the first rinsing process takes place. The last third and outlet chambers are for the final rinse and drying process. Both chambers (inlet and outlet) can be used simultaneously, which increases machine capacity and reduces cross-contamination compared to single-chamber systems.►