Conformal Coating Cleaning
Thorough cleaning of coated parts means that these products can return to service without compromising their functionality and reliability. The reuse of coated parts (frames) in operations results in total cost savings of purchasing these items. The second complex process is the complete or partial removal of coatings from coated PCB surfaces, their repair and subsequent return to service.
Overall, conformal coating cleaning is very complicated and our agents achieve very good results in this area.
Sonix® 355 CRRD is designed to remove the cured conformal coating from coating frames, parts of coating machines and coated PCBs for repair and subsequent coating. All processes are automated and run in 4 separate process chambers, which are also storage tanks. Can also be used for “dual” application - one chamber for coating frame and pallets, second for reflow oven and wave soldering machine parts. All 4 chambers can be used at the same time, which increases the cleaning capacity of the machine, reduces cross-contamination compared to single-chamber systems and optimizes rinsing with two rinsing chambers.Technical data sheet
The InJet® 888 CRD-2F is developed primarily for the removal of smelting residues from soldering frames, and the maintenance cleaning of soldering equipment components. The cleaning system can be used for PCB cleaning, or for cleaning a combination of boards, misprints and stencils. It can also be used for cleaning of conformal coating frames. The cleaning system can be used for post-soldering board cleaning, or for cleaning a combination of boards, misprints and stencils. The 2F designation refers to a 2-storey solution where smaller parts can be cleaned in two baskets simultaneously to maximize cleaning capacity. After easy removal of the rotation arm, large parts can be cleaned in one (lower) basket.Technical data sheet►
InJet® 388 CRD is developed primarily for the removalof solder pastes and SMT adhesives from stencils, PumPrints,squeegees and misprints. The cleaning system can also be used for PCB cleaning, or for a combination of PCB cleaning and the afore-mentioned cleaning processes. The machine can also be used for the removal of cured conformal coating.Technical data sheet►
Alcohol-based cleaning fluid determined to remove cured and uncured acrylic conformal coatings from coating frames, PCBs and components of coating machine parts. Determined to clean also uncured epoxy adhesives from stainless steel stencils and plastic pumpprints. Ready-mix intended for direct use. Designed for use in all types of cleaning machines.Technical data sheet►
Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts. Used for epoxide, polyurethane and acrylic coatings. Ready-mix, intended for direct use. Intended for use in all types of cleaning machines, mainly for the ultrasound.Technical data sheet
Alcohol-based cleaning fluid determined to remove cured and uncured conformal coatings from coating frames, PCBs and components of coating machines parts. Intended specifically for the dissolving of silicone coatings, also effective for most types of acrylic coatings. High compatibility with most aluminium alloys of coating frames. Ready-mix, intended for direct use. Intended for use in all types of cleaning machines, mainly for the air bubble and ultrasound.Technical data sheet►
The water-based cleaning agent (stripper) is determined to remove cured and uncured conformal coatings from coating frames, PCBs (varnish remover pcb), and coating machine parts components. Intended for removing acrylate and polyurethane coatings. Ready-mix, intended for direct use. Intended for use in cleaning systems with air-bubbling or high-pressure spray-in-air cleaning technology.Technical data sheet
Highest level of DCT traceability option fulfilling Industry 4.0 requirements, using the online connection of cleaning machine to customer‘s network thru software. The output is not file but access to OPC client with online cleaning process data. Customer can use this data for all his own other traceability operations.Technical data sheet
A basic version of traceability when general process data like set times, temperatures, conductivity levels, conductivity and cycle number are stored to CSV file in cleaning machine touch screen SD card. PLC is ready for connection of Barcode Reader. Customer can choose standard DCT barcode reader (P/N 10119A) or use own barcode reader when DCT need to setup its setting (P/N 10119C).Technical data sheet